User's Manual

TWDCT45-A2 Handset Settings 39
R0
Auto Talk
1. Press Menu, scroll to Handset
and press OK.
2. Scroll
to Auto Talk. Press OK.
3. Press
or to highlight On or
Off. Press OK.
Key Beep
1. Press Menu, scroll to Handset
and press OK.
2. Scroll
to Key Beep. Press OK.
3. Press
or
to highlight On or
Off. Press OK.
PABX Access Code
1. Press Menu, scroll
to Handset
and press OK.
2. Scroll
to PABX Access Code.
Press OK.
3. Press
or
to highlight Set
Code, On or Off. Press OK.
You must set a code first before setting
the PABX Access Code to On.
If you select Set Code:
4. Enter the digits. If you make a mistake
press Clear. Press OK to confirm.
AUTO TALK
Information
Setting Auto Talk = On will
make the handset
automatically answer the
call when the handset is
ringing and lifted from the
base or charger
.
(same as pressing
)
If Auto Talk = Off, you
must press
to answer
the call. The default is
On.
KEY BEEP
Information
The
WDCT45-A2 handset will
make a beep tone each
time any button is pressed.
The beep tone can be
turned On or Off. The
default is On.
PABX ACCESS CODE
Information
Some telephone systems
require you to dial a special
access code, or digit(s) to
access an outside line.
The
WDCT45-A2 can be pre-
programmed to dial the
access code for you before
the digits you press to
make a call are dialed. The
default is no code set.