User's Manual

18 Getting To Know The WDCT45-A2
R0
The up/down, left/right
Navigation keys are
location on the big dial
button in the center of the
handset. Option select
buttons are located to the
sides of the Navigation
keys:
You select the option
displayed by pressing the
Option button underneath
it.
For example, select
Names by pressing the
option button below it.
Navigating the menu
Your WDCT45-A2 has a menu system which
is easy to use. Each menu leads to a list of
options. The menu map is shown on the
following page.
When the handset is switched on and in
standby, press the option button under
Menu to open the main menu. Press the
or
button to scroll to the menu
option you want. Then press OK to select
further options or confirm the setting
displayed.
For example to change the handset ringer
volume:
1. Press Menu then scroll
to
Handset and press OK.
2. Scroll
to Ring Volume then
press OK.
3. The current setting is displayed. Press
to increase or
to decrease
the volume, the ring tone is played at
each level you select. Press OK to
confirm.
Exit / back one level in the menu
To go back to the previous level in the
menu, press Back.
To cancel and return to standby at any time,
press and hold Back.
If no button is pressed for 60 seconds, the
handset returns to standby automatically.