User's Manual

IMPORTANT
Before registration,
make sure the
handset batteries are
fully charged and
that you are close to
the base.
If the handset is
already connected
to a base station,
the corresponding
numbers will flash.
The factory setting
PIN is set to 0000.
An internal number
will be allocated to
the handset once
registered. The first
handset registered
(main handset) has
the internal number
1. Any further
handsets that
are registered are
allocated internal
numbers (2-5) in the
order of registration.
The internal number
is shown in the
display on the right
side.
With auto setting,
the handset changes
automatically to the
nearest base station
when the connection
to the current base
station breaks off.
You can use up to five handsets with your Telstra 5200/5200a. To do this
you need to register each additional handset with the base following the
simple steps given below. Each handset can be registered on up to four
bases.
Register a Telstra 5200/5200a handset to a base
On the base, press and hold
until you hear two beeps. You have 90
sec. to complete the following steps.
On the handset, press
scroll to Register, then press the
button to confirm.
1. Scroll
to REG BASE and press the button to confirm.
2. Enter the number of the base station (1-4) using the keypad. Press the
button to confirm.
3. After the base station has been found, you must enter the PIN code.
4. Press the
button to confirm. After a few seconds you will hear a
signal tone. The handset is now logged on and can be used for external
and internal calls.
Select base
If your handset is registered to more than one base, for example, one
at work and one at home, you can quickly select which base it takes its
signal from.
1. Press the
button and scroll to REGISTER.
2. Press the button to confirm.
3. Scroll
to SELECT BASE and press the button to confirm.
The display will now show all base stations that the handset is already
logged on to. The number of the currently active base station will flash.
Select the required base station to which the handset is to be switched
by using the keypad.
Or
4. Change to the AUTO setting using the and buttons.
5. Press the
button to confirm.
Additional handsets and bases
43
Getting to know your Telstra 5200/5200a
8
Handset display icons
CY_RK`OKXOaWO]]KQOSXcY_\
>OV]^\K2YWO7O]]KQO]Y\7O]]KQO,KXU]O\`SMO
CY_K\OWKUSXQKXOb^O\XKVMKVV
0VK]RSXQ$CY_K\O\OMOS`SXQKXSX^O\XKVMKVV
=^OKNc$CY_K\OWKUSXQKXSX^O\XKVMKVV
=^OKNc$CY_K\OSX^ROMKVVO\VS]^
0VK]RSXQ$>RO\OK\OXOaMKVV]]^Y\ONSX^ROMKVV]VS]^-8.

>RS]X_WLO\SX^ROMKVVO\VS]^S]KWS]]ONMKVV
>RS]X_WLO\SX^ROMKVVO\VS]^aK]KV\OKNc^KUOX
0VK]RSXQ$:VOK]OMRK\QO^RORKXN]O^
=^OKNc$3XNSMK^SYXYPLK^^O\cMKZKMS^c
-cMVSXQ^R\Y_QR^RO]OQWOX^]$>RORKXN]O^S]LOSXQMRK\QON

AROX^RO:RYXOLYYUS]LOSXQ_]ON
AROXSXWOX_YZO\K^SYX
>ROUOcZKNVYMUS]KM^S`K^ON
=^OKNc$>ROMYXXOM^SYX^Y^ROLK]O_XS^S]]K^S]PKM^Y\c
0VK]RSXQ$,K]O_XS^S]Y_^YP\KXQO
>ROX_WLO\S]VYXQO\^RKXNSQS^]
CY_RK`OKXOa^Ob^=7=WO]]KQO
CY_K\OSXRKXN]P\OOWYNO
7_^OP_XM^SYXS]LOSXQ_]ON
* Monthly charges apply. Message retrieval is free from Telstra fixed phones anywhere in Australia. Retrieval
charges apply from mobiles, Payphones and for calls using a Telstra Telecard™
5200-5200a.indd, Spread 9 of 26 - Pages (44, 9) 20/9/05 12:32 PM