User's Manual

Three-way call
You can hold a three-way call between two internal handsets and an
external caller.
1. During an external call, press then the handset number you want
(1–5). Your external caller is put on hold.
2. When the other handset answers, press and hold
to start the
conference call. If the other handset does not answer, press again
to speak to your external caller.
3. Press
to hang up.
Additional handsets and bases
45
Getting started
6
Battery performance
To keep your batteries
in the best conditions,
leave the handset off
the base for a few hours
at a time (after the
initial 16 hour charge).
Please note however,
that new NiMH
batteries do not reach
full capacity until they
have been in normal
use for several days.
Running the batteries
right down at least
once a week will help
them last as long as
possible.
The charge capacity of
rechargeable batteries
will reduce with time
as they wear out, so
reducing the talk/
standby time of the
handset.
Eventually they will
need to be replaced.
New batteries can be
obtained from the
TecHelp on 1300 369
193 or your nearest
electrical retailer.
Helpline
If you have any
difficulties setting
up your Telstra
5200/5200a, please
call the TecHelp on
1300 369 193.
Time settings
Set time on the handset
If you have subscribed to Telstra Calling Number Display feature*, the
time will be set automatically when you receive your first call. You can
also set the time manually.
1. Press scroll to handset.
2. Press the button to confirm.
3. Scroll
to CLOCK SET and press the button to confirm.
4. Enter the current time in 24 hour format using the keypad. E.g.
2.04PM = 1404.
5.Press the
button to confirm.
Setting time on the answering machine
You will need to set the date and time so that you know when each
message was received.
Once a message has been played back, the machine will announce, for
example, “Tuesday, four fifty, pm.”
1. Press and hold
until you hear the current setting.
2. Press
or to scroll through the days and press to select. The
day is announced followed by the current hour setting.
3. Press
or to scroll through the hours and press to select.
The hour is announced followed by the current minutes setting.
4. Press or to scroll through the minutes and press to select.
The newly set day and time is announced.
5200-5200a.indd, Spread 7 of 26 - Pages (46, 7) 20/9/05 12:32 PM