User's Manual

Using your answering machine (Telstra 5200a only)
31
To select your outgoing messages via the base unit
1. Press and hold the
button until you hear, "Please select outgoing
message", then release the button.
Then:
2. To set Answer and Record, press and release the button. P/1 will be
displayed and will flash consecutively.
Or
2. To set Answer Only, press and release the button P/2 will be
displayed and will flash consecutively.
Your chosen setting will be announced over the base speaker.
To delete your own outgoing message and re-instate the pre-
recorded outgoing message via the base unit
You can delete your personalised outgoing message and return to your
Telstra 5200a’s pre-recorded outgoing message.
1. First select the outgoing message that you want to delete.
2. Whilst your outgoing message is playing press the
button on the
base unit.
The message will stop playing and you will hear a short beep, then the
default pre-recorded outgoing message will be played.
Using the Telstra 5200a answering machine via the base unit
To playback messages
1. Press the button.
The prompt will announce, “You have (n) messages”.
Your message(s) will be played back, starting with the first message
received.
At the start of each message, the number of the message is announced.
The message number will also be shown on the base unit display.
Using the phone
20
By default, Auto-talk
is set to On.
KEEP TRACK OF
YOUR PIN
If you change the
System PIN, keep a
record of the new
number by writing in
the space provided
on page 49.
You need your
System PIN for
registering handsets
and for some other
optional settings.
Auto-talk
When the handset is on the base and the phone rings, you can answer a
call just by picking the handset up from the base, without having to press
the
button.
You can also end a call by placing the handset back on the base.
By switching Auto-talk off you will need to press
to answer a call.
1. Press the
button and scroll to Handset.
2. Press the
button to confirm.
3. Scroll to AUTO ANSWER and press the to confirm.
4. Select ON or OFF using the
or buttons and press the
button to confirm.
Security PIN
Some functions of the telephone are protected against unauthorised
use by a PIN code. The default security PIN is 0000. You can set your own
security PIN preference.
1. Press the
button and scroll to SETUP.
2. Press the
button to confirm.
3. Scroll
to PIN CODE and press the button to confirm.
4. Enter the current four digit PIN code using the keypad and press the
button to confirm.
5. Now enter the new four digit PIN using the keypad and press the
button to confirm.
6. Enter the new four digit PIN code once more for confirmation and press
the
button again.
5200-5200a.indd, Spread 21 of 26 - Pages (32, 21) 20/9/05 12:32 PM