User's Manual

Using the phone
19
You can only adjust
internal melody and
volumes when you
are operating more
than one handset.
The handset name
can be a maximum
of 8 characters.
The default
language is English.
Base station ring volume
There are five base ringer volume levels and ‘Off.
1. Press
and scroll to SETUP.
2. Press the
button to confirm.
3. Select the BASE VOLUME and press the button to confirm.
4. Scroll
or to select required volume and press the button
to confirm.
To switch the keypad & warning beeps on & off
1. Press the
button and scroll to HANDSET.
2. Press the button to confirm.
3. Scroll
to BEEP and press the button to confirm.
4. Scroll
or to the function you would like to select and press
the button to confirm.
5. Use the and buttons select on or off.
6. Press the
button to confirm.
Handset name
The display will show the duration of the call and the name of the
handset for a few seconds after a call has ended. If you have several
handsets connected to one base unit, it can be useful to give each handset
its own name.
1. Press scroll to Handset.
2. Press the
button to confirm.
3. Scroll
to NAME and press the button to confirm.
3. Enter the required name using the keypad. Letters already entered can
be deleted by repeatedly press the
button.
4. Press the
button to confirm.
Handset language
The display messages can be set up in German, Italian, English, French
and others.
1. Press
and scroll to HANDSET.
2. Press the
button to confirm.
3. Scroll to LANGUAGE and press the button to confirm.
4. Using the
and buttons select the language you would like
and press the button to confirm.
Using your answering machine (Telstra 5200a only)
32
To pause a message during playback
1. While listening to the message, press the
button.
The message will be paused.
You will hear a beep every 10 seconds and the message display will
show P.
2. Press the
button again to resume playback.
To skip forward and backward through messages (including fast
playback)
During playback:
1. Press the button to skip forwards to the next message.
If you press and hold the
button the current message will be played
at one and a half times the speed (fast playback).
Press the button to return to the start of the current message.
3. Press again to return to the start of the previous message.
To delete an individual message
1. Press the button on the base unit during message playback.
The prompt will announce, “Message deleted”.
2. The message is not deleted yet, but at the end of playback when there
is an 8 second countdown followed by a confirmation tone. Let the
countdown reach 0 and all the selected messages are deleted and the
remaining messages are saved.
To delete all messages
When all messages have been played the prompt will announce, “End of
messages. To delete all messages, press delete”. The display counts down
from 8-0.
1. During the countdown press the
button and the prompt will
announce, “All messages deleted”. At the end of the countdown there will
be a confirmation tone.
To cancel deletion of messages
1. Press the
button during the 8-0 countdown.
All messages will be saved including any marked for deletion.
5200-5200a.indd, Spread 20 of 26 - Pages (20, 33) 20/9/05 12:32 PM