User's Manual

Getting to know your Telstra 5200/5200a
Navigating the menus
Your Telstra 5200/5200a has a menu system which is easy to use. Each
menu leads to a list of options. You’ll find a menu map on the following
page.
When the handset is switched on and in standby, press the option button
under Menu to open the main menu.
Use the
and buttons to scroll to the menu option you want.
Then select OK to select further options or confirm the setting displayed.
For example, to change the handset ringer volume:
1. Press
then scroll to Handset. Confirm by pressing the
button. Scroll to EXT Ring Vol or INT Ring VOL and
press to confirm.
2. Use
and to select the required volume level, or choose
Volume off to switch the ringer off.
3. Press the button to confirm.
Exit or go back one level in the menu
To go to the previous level in the menu, press
.
9



!
+,-
456
./0
789
1
23
<ONSKV
-KVV]
-KVV
AKS^
7_^O
7O
X_

Sending sub-addressed text messages
To send a sub-addressed text message to another user, simply add an
additional digit corresponding to their sub-address to the number you are
sending to.
Only a text message (SMS) phone set-up with that sub-address on the
service will automatically answer the call and receive the text message.
Default settings for text messaging (SMS)
Receiving Service Centre 01983391
Sending Service Centre 01983391
Set SMS Alert On
Sub-address 1. Common Inbox subaddress=0, for incoming
and outgoing SMS.
2. Additionally, each handset 1-5 automatically
setup for subaddress 1-5, for incoming SMS
calls. All sent SMS’s will be from the Public
Mailbox (sub-address ‘0’). They will not have a
sub-address corresponding to the handset
number.
Default system PIN 0000
Note:
Multiple users can
only be set up on
fixed line services.
You cannot send
a sub-addressed
message to a mobile
service.
Text Messaging (SMS)
42
5200-5200a.indd, Spread 10 of 26 - Pages (10, 43) 20/9/05 12:32 PM