7471 – hilips DEUSA DECT-B05 – DECT6.0 digital cordless phone 3111- B) – 1 14.06.06 USA DECT-B05 User manual USA DECT-B05-UG_3111-285-31161-(GB).
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 FCC Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Important information EN For your safety This equipment is not designed to make emergency calls in the event of a power failure. An alternative has to be made available to allow emergency calls. • Do not allow the product to come into contact with liquid. • Do not open it as you could be exposed to high voltages. • Never use any battery type other than the one supplied.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 What’s in the box DECT 522 handset DECT 522 base station Line cord* Battery door ��������������������������� ������� EN Power adaptor for base station 2 x AAA rechargeable batteries �������� ����������� ���������� ������� � ������� � ������� Quick start guide User manual Warranty information * The line adaptor may not be attached to the line cord.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.
471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Your DECT 522 EN Display icons Status icons Reminder icons (with number) eg. voicemail messages and 5 missed calls) Status icon Description The handset is registered and within range of the base station. Blinks when the handset is out of range or is searching for a base.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Your DECT 522 EN Overview of the base station Paging key Main features of your DECT 522 Here is a quick view of the menu options available in your DECT 522. For a full explanation of each menu option, see the detailed sections in this User Manual. Menu To Page Names Add, edit and manage your phonebook entries 19 Call Log Display details of missed, received and dialled and calls. Call, save or delete numbers.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Your DECT 522 EN Menu navigation The basic steps of navigating through the menus and on-screen options: 1 From the standby screen, press Menu The main menu is opened 2 Use and to scroll through the options and press Select to open the menu displayed. 3 Use and soft keys to select on-screen options, eg. Select to choose the highlighted option, or Back to return to the previous menu.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Connect EN Connect the base station TIP The position in which you placed the base station can have an effect on the range and performance of your DECT 522. Avoid placing the base station too close to large metal objects such as filing cabinets, radiators or electrical appliances.This can impair the range and sound quality. Buildings with thick internal and external walls may impair transmission of signals to and from the base.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Install EN Install and charge the handset batteries Your DECT 522 is supplied with 2 rechargeable batteries. IMPORTANT The handset must be charged for at least 24 hours before using it for the first time. Install batteries 1 2 Slide off the battery door (if fitted). Insert the batteries as shown and slide back the door. Charge batteries 1 Place the handset face-up on the base station. A beep confirms that the handset is placed correctly.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Install EN A low battery alert will inform you that the handset has to be recharged. If this happens during a call, the call may end shortly after the alert. If the battery level becomes exceedingly low, the phone automatically switches off shortly after the alert. Any function in progress will not be saved.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Call EN Make a call 1 Press . Display shows Calling. 2 Enter the number Pre-dial 1 2 Enter the phone number (maximum 32 digits). If you make a mistake, press Clea to delete the last digit. Press to dial the number. Call from the phonebook 1 Press in standby mode. 2 Scroll or 3 Press to dial the number. to a phonebook entry. Search alphabetically for phonebook entries 1 2 Press Names then press Select to choose Search.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Call EN Answer a call 1 When the phone rings, press . TIP If Auto Talk mode (see page 34) is on, you can simply lift up the handset from its base station to answer the call.The default setting is off. An incoming call has priority over other events.Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc. will be aborted.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Call EN Handsfree (Loudspeaker) mode 1 During a call, press to switch on the loudspeaker. Press call back to the earpiece. again to switch the WARNING Switching on handsfree mode can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. Adjust loudspeaker volume 1 Press or to adjust the volume displayed on-screen.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Call EN Switch between an internal and external call 1 During an external call, press 2 Enter the number of the other handset and press OK. 3 When the other handset answers you can speak privately to your internal calle 4 Press 5 Press . Your caller is put on hold. to transfer back and forth between calls. to hang up. Three-party conference call 1 During an external call, press 2 Enter the number of the other handset and press OK.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Call EN Caller identification If you have subscribed to a Caller Line Identification (CLI), the name of the caller will be displayed together with the date & time of the call (if provided by the network). If the number matches an entry in the phonebook, the name will be displayed instead. For some incoming calls the telephone number may not be available.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Names EN Names . . . . . . . . . . . . Add entry . . . . . . Copy Phonebook . . . . . . Memory Status . . . . . . Delete Phonebook View and dial phonebook entries 1 2 Press in standby mode to open the phonebook. If there are entries stored they are listed in alphabetical order. Scroll or to browse the phonebook.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Names EN Text and number entry For example, to enter the name ‘Paul’: Press once to enter P, press once to enter A, press twice to enter U, then press three times to enter L. If you make a mistake, press Clear to delete the last character. Names can be up to 12 characters and numbers up to 24 digits.The number of available characters/digits remaining is shown at the top right of the display.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Names EN Delete phonebook entry 1 Press in standby mode. 2 Scroll or 3 Scroll to Delete Entry and press Select.The display shows Delete [Entry] ?. 4 Press Yes to confirm or No to cancel.The display shows [Entry] Deleted. 5 Press to the entry and press Options. to return to standby. Delete all phonebook entries 1 Press Names. 2 Scroll to Delete Phonebook and press Select.The display shows Delete All Entries?.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Names EN Copy phonebook to another handset 1 Press Names in standby mode. 2 Scroll to Copy Phonebook and press Select. or 3 Press Select to choose To handset then scroll handset number. 4 Press Select to begin copying.The display shows Copying... On completion the number of entries copied is displayed. 5 Press or to the destination to return to standby. At the receiving handset: 1 The display shows Replace Phonebook?.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Network Services Network Services EN . . . . . . . Show . . . . . . . Edit Entry . . . . . . . Delete Entry . . . . . . . Delete All Store a network service number Store up to 10 of your most important or useful network service numbers, for example helplines, directory services, voicemail service etc. 1 Press Menu, scroll 2 Scroll or 3 Scroll to Edit Entry and press Select. 4 Enter the name and press Save.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Network Services EN Delete a network service number 1 Press Menu, scroll 2 Scroll or 3 Scroll to Delete and press Select.The display shows Delete [Entry] ?. 4 Press Yes to confirm or No to cancel.The display shows [Entry] Deleted. 5 Press or to Network Services and press Select. to the entry and press Options. to return to standby. Delete all network service number 1 Press Menu, scroll or to Network Services and press Select.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Call Log Call Log EN . . . . . . Missed Calls . . . . . . Received Calls . . . . . . Dialled Calls . . . . . . Delete Calls The call log contains details of missed, received and dialled calls. Entries are displayed in chronological order with the most recent call at the top of the list. In order to receive details of received and missed calls you will need to subscribe to a Caller Line Identification (CLI) service.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Call Log EN 4 To view further details about the call, press Options then Select to choos Show Details. Or, to dial the number displayed, press 5 Press . to return to standby. Save a number from the call log to the phonebook 1 2 Press Menu and scroll or to Call Log and press Select. Scroll or to the log you want: Missed Calls, Received Calls or Dialled Calls and press Select. 3 Scroll or to the entry you want and press Options.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Call Log EN Delete all entries in a call log You can delete all entries in any one of the individual call logs or all entries in the entire call log. 1 Press Menu and scroll 2 Scroll 3 to Call Log and press Select. or to Delete Calls and press Select. Scroll or to the log you want: Missed Calls, Received Calls, Dialled Calls or All Calls and press Select. 4 Press Yes to confirm or No to cancel.The display shows All Calls Deleted.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Clock & Alarm EN Clock & Alarm . . . . . . . Date & . . . . . . . Alarm . . . . . . . Time Format Date and time If you have subscribed to a Caller Line Identification service (CLI), the date and time is automatically set when the first incoming call is received. If you have not subscribed to a CLI service or your CLI service did not automatically set the date and time, you can set them manually.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Clock & Alarm EN Alarm You can set a daily, weekday or once only alarm. If you have more than one handset, you can set a different alarm on each. Set/cancel an alarm 1 Press Menu, scroll to Clock & Alarm and press Select. 2 Scroll to Alarm and press Select. 3 Scroll to On and press Select. or Or, to cancel an already set alarm, press Select to choose Off, then to standby.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Personal Settings EN Handset . . . . Ringtone Base . . . . . Dialling Mode . . . . . Ringer Volume . . . . . Ring . . . . . Receiver Volume . . . . . Recall . . . . . Handset Name . . . . . First ..... . . . . . System ..... . . . . . Master . . . . . Menu . . . . . Screensaver . . . . . Light Timeout . . . . . Display Contrast . . . . . Auto . . . . . Key . . . . . Redial . . . . .
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Personal Settings EN Set the ringer volume There are 5 volume levels, or you can switch the ringer off. 1 Press Menu, then scroll to Settings and press Select. 2 Press Select to choose Handset Settings. 3 Scroll to Ringer Volume and press Select. 4 Scroll or 5 Press Save to confirm. 6 Press to choose the volume level 1– 5 or Ringer Off. to return to standby. When Ringer Off is selected is, the icon is displayed on the screen.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Personal Settings EN Change the handset name You can name the handset and display the handset name in standby mode.The default name of your handset is PHILIPS. The handset name can be a maximum of 10 characters, e.g. Mike, Kitchen. 1 Press Menu, then scroll to Settings and press Select. 2 Press Select to choose Handset Settings. 3 Scroll 4 Enter the name (up to 10 characters). If you make a mistake, press Clear. 5 Press Save to confirm.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Personal Settings EN Change the menu colour 1 Press Menu, then scroll to Settings and press Select. 2 Press Select to choose Handset Settings. 3 Scroll to Menu Colour and press Select. 4 Scroll or 5 Press Select to use the new colour. 6 Press to choose the colour Blue, Orange or Pink. to return to standby. Switch the screensaver on/off The screensaver displays a clock face plus the time and date.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Personal Settings EN Set the display contrast You can adjust the contrast to suit different lighting conditions. 1 Press Menu, then scroll to Settings and press Select. 2 Press Select to choose Handset Settings. 3 Scroll or to Display Contrast and press Select. 4 Scroll or to Low, Medium or High. 5 Press Select to confirm. 6 Press to return to standby.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Personal Settings EN Set the redial number length This sets the length of numbers stored in the redial list.The maximum length is 32 digits. 1 Press Menu, then scroll to Settings and press Select. 2 Press Select to choose Handset Settings. 3 Scroll or to Redial Length and press Select. 4 Scroll or to Long or Short. 5 Press Select to confirm. 6 Press to return to standby.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Personal Settings EN Base settings Set the dialling mode The default DECT 522 dialling mode setting is suitable for your country and network operator. It is unlikely that you should need to change this setting. When connected to certain switchboards or public exchanges, you may need to switch from tone to pulse dialling. 1 Press Menu, then scroll to Settings and press Select. 2 Scroll to Base Settings and press Select.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Personal Settings EN Set the recall mode The key is used with certain network services and PBX/switchboard services. You will not normally need to change this setting unless advised to do so. 1 Press Menu, then scroll to Settings and press Select. 2 Scroll to Base Settings and press Select. 3 Scroll or to Recall Mode and press Select. 4 Scroll or to Recall 1 or Recall 2. 5 Press Select to confirm. 6 Press to return to standby.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Personal Settings EN 5 Enter the new PIN and press Save. 6 Re-enter the new PIN and press Save. Master reset This restores all the original settings to your DECT 522. Handset registrations will not be affected. Warning When performing a master reset, all phonebook entries are deleted To achieve a master reset 1 Press Menu, then scroll to Settings and press Select. 2 Scroll to Base Settings and press Select.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Registration EN Up to 5 handsets can be registered to one base station.Additional handsets must be registered to the base unit before you can use them.Your DECT 522 handset can also be registered to a total of 4 bases.You can then select the base you want to use. For example, one at work and another at home. The instructions below apply specifically to your Philips DECT 522 handset.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Registration EN Switch bases If your handset is registered to more than one base, you can switch between them. Switch bases 1 At the handset, press Menu the scroll 2 Scroll 3 In Use to Registration and press Select. to Select Base and press Select. is shown next to the base currently being used by the handset. Scroll to select a new base and press Select. or Unregister a handset You can use one handset to unregister another.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Other features EN Lock the keypad You can lock the keypad to prevent accidental dialling while carrying the handset around. 1 2 Press and hold the icon. . A beep confirms the keypad is locked and the screen shows To unlock the keypad press Unlock, then press within two seconds. Paging Paging is a useful way of finding lost handsets. 1 Press on the base. All handsets ring and display Paging Call. 2 Press again to cancel the paging call.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Troubleshooting EN Problem Solution The icon is not blinking when the handset is placed on the base • Bad battery contact – move the handset slightly • Dirty contact - Clean the battery contact with a cloth moistened with alcohol • Battery is full – no need to charge No dialling tone • No power – check the connections.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Troubleshooting Problem Solution … when using a handset • Base station may be busy with another handset. Wait until it is available. Noise interference on your radio or television • Your base station or charger may be too close. Move it as far away as possible. Caller Line Identification service does not work • Check your subscription with your network operator No ring tone • The ring tone is deactivated. Increase the volume.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 General information EN Electric, Magnetic and Electromagnetic Fields (EMF) 1 Philips Royal Electronics manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electromagnetic signals.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.
7471 – hilips DECT 522 – 522-UG_3111-285-31161-(GB).indd 47 3111-285-31161-B) – 1 14.06.
7471 – hilips DECT 522 – 3111-285-31161-B) – 1 14.06.06 Specifications are subject to change without notice.. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2006 © Koninklijke Philips Electronics N.V.All rights reserved. www.philips.com 3111 285 31161 (GB) 522-UG_3111-285-31161-(GB).
