User's Manual

Pressing the KEY_HANDSFREE from standby mode causes the unit to enter speakerphone mode.
The call is ended by pressing KEY_HOOK_OFF. The user can switch between handsfree and normal
mode by pressing KEY_HANDSFREE.
Pressing UP/Down key to adjust the speaker volume during handfree mode. (5 steps)
The adjusted level shall be kept for next handfree mode.
The setting is only for handfree speaker volume and it shall not effect the earpiece sound level.
When in speakerphone mode the SPEAKER_IND icon shows in the LCD
7 Quick default settings
If you have lost your PIN code, the following procedure allows you to restore default settings on
handset and base.
Press KEY_STAR on handset when power up (insert and remove batteries). The display shows
“DEFAULT”. Press KEY_OK. When the handset locks onto its base, both will restart.
8 Subscribe a new handset
Refer to MENU mode’s REGISTER page
The base can support a maximum of 2 handsets. If you already have 2 handsets, and you wish to
change one of them, you must firstly delete a handset, then associate the new handset.
9 Test modes
9.1 Handset test modes
Refer to document of TEST MODE
9.2 Base unit test modes
Refer to document of TEST MODE
39 of 40