User's Manual

4.3.5 EXT MELODY
This menu enables you to choose a different melody for external call
• Select "EXT Melody" and validate
• Select the melody of your choice (1 to 5) and validate
4.3.6 DATE AND TIME
There are two menu inside the DATE and TIM. One is to set the date and other is to set the time.
4.3.6.1 Date setting
• Select the DATE ?
• When enter Date setting mode, LCD display current Date with flashing Date
indication. (Display on dots matrix area)
• Enter the Date and Month by the following format.
- The format is DD / MM. If the Date is 5
th
, it should enter “05”. If the date is 15
th
, it
should enter “15”
- After enter data, enter the month. If Jan, it should enter 01.
• If the CLIP data has Date data, the Date data shall be updated by CLIP Date data.
• The Date data shall be kept at base unit and when the handset turned on, the
Date data shall be transferred from base to handset.
• If enter wrong data such as 32
nd
for Date field, it will be error tone and change to
01 on date filed.
4.3.6.2 Time setting
• Time setting should be 24 hour format.
• When enter Time setting mode, LCD display current time with flashing hour
indication. (Display on dots matrix area)
• Enter the current time by 24-hour format and validate. And same time, the update
data send to base to keep for all the handset to have same clock.
• After validate the time, the time indication move to 7-segment time display area.
• If the CLIP data has time data, the clock shall be updated by CLIP time data.
• The time data shall be kept at base unit and when the handset turned on, the time
data shall be transferred from base to handset.
• If enter wrong data such as 25 for Hour field, it will be error tone and change to 01
on hour filed.
4.3.7 ALARM SET
This menu enables you to set the Alarm.
• Select “Alarm Set” and validate.
• Select “ON” or “OFF” by using KEY_UP/DOWN key and validate.
• If select “ON”, the display shows previous setting time with flashing hour indication.
(If no previous data, the display should be 00:00)
• Time setting is same as Clock setting.
• After set the Alarm time, the Alarm icon shall be ON.
4.3.8 AUTO ANSWER
When there is an incoming call and the handset is on the base, the phone automatically takes the line.
• Select "Auto Answer” and validate
• Select "ON" to activate "OFF" to deactivate and validate
4.3.9 NAME
This function allows you to personalise each handset.
• Select "Name" and validate
• Enter the name and validate (max 10 chars)
• During entering the name, the user can select the character case by pressing KEY_LNR
34 of 40