User's Manual

Press Page button on the base.
The handsets will ring RING_1 at volume of handset internal ring level setting and display INT with
“□□□□”during 30s unless page key is pressed again on the base or a key is pressed on any locked
handset. (When the handset set to key lock, but it shall be possible to stop the handset paging sound
by pressing any key)
3.11 Battery and charge management
3.11.1 Battery indicator
5 levels indicators icon for mean battery voltage:
> = EEP_BAT_FULL_LEVEL
> = EEP_BAT_HALF3_LEVEL
> = EEP_BAT_HALF2_LEVEL,
Blanking > = EEP_BAT_ALARM_LEVEL
3.11.2 Low battery conditions
If the following conditions are applied:
During a call,
• If mean battery level is less than EEP_BAT_HALF1_LEVEL,
• If battery warning tone option is ON
then a TONE_LOW_BATT will be emitted every minute.
In any state (standby or call), If mean battery level is less than EEP_BAT_ALARM_LEVEL, handset
will enter in power down mode.
3.11.3 Charge conditions
If the following conditions are applied:
• In standby mode,
• If battery warning tone option is ON
• The handset is put on its charger (debounce time: 200 ms)
then a TONE_CONFIRM will be played.
Charging icon:
Scroll for display handset is charging, fast scroll when quick charging mode,
3.11.4 Start-up with low batteries
If battery level at start-up is lower than EEP_BAT_HALF2_LEVEL, the handset will stay in sleep mode
(no LCD, no RF, no MMI working). You need to put the handset into charge until battery level reaches
EEP_HALF2_LEVEL.
25 of 40