User's Manual

The call timer display will come again after 15 seconds if no key pressed.
During standby mode:
The
icon will flash if un-viewed unanswered CLIP(s) in call list, icon will be off after all
unanswered call is read.
3.7.3 VMWI indication
Refer to the VMWI operation
3.7.4 Recall CLIP list
Unanswered and answered calls are stored in the CLIP list of each handset independently (in
EEPROM).
Note: any new CLIP call will be stored in EEPROM .
Size storage
Each entry will store:
¾ The call number (20 digits)
¾ The caller name (12 digits) if the network send it
¾ The date and hour of the call
Storage sequence
The CLIP information that has been received during incoming alert phase (calling number, name
date/hour) is stored then displayed.
If the new call entries, The
icon will flash (480ms ON/OFF) and will off after all new call is read.
Note: The new message indication is reset at power up, so the
icon is always off after a reset.
MMI operation
To retrieve the entries:
1. Press KEY_ UP/CLIP or KEY_ DOWN/CLIP to enter the call list. The
icon will stay ON
for Unanswered Calls and the
icon will stay ON for Answered Calls. If the list is already
empty, then “EMPTY” is displayed
on the 1
st
line
2.
[Display example]
3. Scroll through the calls using the up KEY_UP/CLIP and down KEY_DOWN/CLIP arrows.
4. You will find the different fields of the entry:
21 of 40