User's Manual
Table Of Contents
- Features of SunCorp GAP DECT
- Main User interface
- Call User interface
- MENU Settings
- Prefix dialling
- DECT 24 addendum (Set the EEPROM setting for DECT 24)
- Quick default settings
- Subscribe a new handset
- Test modes
- Specifications
• Phonebook name is on the 1
st
line and calling number is on the 2
nd
line if the number matches
with the CLIP calling number
• CLIP calling name is on the 1
st
line and calling number is on the 2
nd
line if the name data is
transmitted. However, if the number is match with one of phonebook memorized number, it
shall use phonebook memorized name.
• CLIP calling number
• Number matching method is as follows.
- If the one of number which CLIP or phonebook is less than 5 digits, it will not compare.
(If the one of phonebook number is 1234, this number will not use for number
matching)
- If the CLID received 10 digits and phonebook number is 8 digits, CLID last 8 digits will
use for the matching with that phonebook number. And if the CLID is 8 digits and
phonebook number is 10 digits, Phonebook number last 8 digits will use for the
matching with that CLID number.
The following special network messages are managed and displayed at the place of calling number:
Message CLIP type Meanings
WITHHELD FSK type I & II The caller hides its identity
UNAVAILABLE FSK type I & II Network failure, the calling number can’t be transmitted
Special caller texts display format: (Display on the 1
st
line)
Display CLIP TYPE Caller texts from network
Private FSK type I & II PRIVATE
Unavailable FSK type I & II UNAVAILABLE
International FSK type I & II INTERNATIONAL
Operator FSK type I & II OPERATOR
Payphone FSK type I & II PAYPHONE
Ringback FSK type I & II RINGBACK
Withheld FSK type I & II WITHHELD
Note:
If text data area has above information, the display shall be according to the text data, than
“Parameter name”
The following parameter shall be detected:
Parameter type Parameter Parameter name Display
01h Date and Time Date and Time
02h Calling Line Identify Number
04h 4Fh UNAVAILABLE Unavailable
04h 50h WITHHELD Withheld
06h 4Ch INTERNATIONAL International
07H Calling Party Name Calling Party Name
0Bh 00h Deactivation VMWI
0Bh FFh Activation VMWI
11h 02h RINGBACK Ringback
16h 0Fh PAYPHONE Payphone
Note:
If Date and Time data is not available, it shall store and display the date and time data from handset
inside timer.
The “Withheld” display can be changed to “Private” by EEPROM setting.
The
icon will stay during all incoming alert phase and during call if you answer the call.
20 of 40