User's Manual

3.4.6 Store a Redial list into PHONEBOOK
• Press KEY_OK during display the redial number which you wish to store to the
phonebook. The display show “Add ?”.
• After appearing the “Add ?” And press KEY_OK to confirm. The display show
“Name ?”.
• Enter the name.
• Press KEY_OK after enter the name.
• Press KEY_OK after modify the number.
• Select the melody of your choice (1 to 5) and validate
• Press KEY_OK to confirm.
Remark:
• If the total digit of Re-dial data inside the re-dial buffer is more than Re-dial size
limit, it will only be able to transfer the digits up to Re-dial size limit.
• If the re-dial data size is more than Phonebook size limit, it will only be able to
transfer the digits up to Phonebook limit.
3.5 Internal call transfer
When you wish to transfer an external call to another extension:
• During a call, press KEY_INT
• Select the number of the internal correspondent that you wish to call; the external caller is put
on hold.
• When the internal correspondent picks up, press KEY_HOOK to hang up and transfer the call.
If the internal correspondent does not pick-up, press KEY_INT again to reconnect to the external caller
on line.
3.6 Conference call between two handset and external caller
When you wish to talk an external call and other handset:
• During a call, press KEY_INT
• Select the number of the internal correspondent that you wish to call; the external caller is put
on hold.
• When the internal correspondent picks up, you can talk with internal correspondent first with
external call on hold.
• Press KEY_# to go to Conference call.
• When one of handset press KEY_HOOK or press KEY_INT. Then the conference call is
finished, but other handset still talk with external caller.
If the internal correspondent does not pick-up, press KEY_INT again to reconnect to the external caller
on line.
3.7 Caller ID (CLIP) features
3.7.1 General features
The phone supports CLIP DTMF and FSK type I and II. See 10.1 for more details.
3.7.2 Caller ID display
Note: Caller identification is only available if you have subscribed to this service with your network
operator.
During the incoming alert:
The CLIP information is displayed if they are provided.
Order of display:
19 of 40