User's Manual

Up to 20 last redial numbers (32 digits) are stored in the redial list (in PP EEPROM).
Outgoing calls to SMS service centre will not be stored in the call list.
The last calls appear with their name if they are stored in the phonebook.
To retrieve the entries:
Press KEY_LNR If the list is already empty, then “empty” is displayed on the 1
st
line.
• When view the redial list, the 1
st
line to display most update data and 2
nd
line to display next
list.
• Press KEY_DOWN/CLIP to move the 2
nd
line data to 1
st
line and 2
nd
line to display next data.
Press KEY_UP to move the 1
st
line data to 2
nd
line and 1
st
line to display most old redial data.
• There is arrow icon on the left side of the 1
st
line to indicate that
• Scroll through the calls with the up KEY_UP/CLIP and down KEY_DOWN/CLIP arrows.
The phonebook name is displayed if it exists. Otherwise it displays the first 11 digits of the
number. If the digits are more 11, the first 11 digits of number are displayed with
icon.
Press KEY_OK to check the remaining digits with
icon.
• Press KEY_OK to toggle between name and number if the number is matched with
phonebook entry. (This is only for 1
st
line data)
• Press KEY_MEM/EXIT return to standby mode
To dial out number just simple press KEY_HOOK.
[Display example]
(Arrow icon is always on the 1
st
line left side)
3.4.3 Dial out redial after OFF HOOK
To recall the last redial entry, just take the line by KEY_HOOK and press KEY_LNR to dial.
3.4.4 Delete a redial buffer :
• Press KEY_CLEAR and “Delete ?” appears.
• Press KEY_OK to make redial number deleted for 1
st
line data, or press
KEY_MEM/EXIT to cancel the delete operation.
To return to the previous menu, press KEY_MEM/EXIT
3.4.5 Delete all redial buffer :
• Long press KEY_CLEAR and “Delete All ?” appears.
• You can either press KEY_OK again and all redial are deleted, or press
KEY_MEM/EXIT to cancel the delete all operation.
To return to the previous menu, press KEY_MEM/EXIT
18 of 40