User's Manual

• Press and hold * key when insert the battery for 5 seconds, “DEFAULT” appears, then
“CONFIRM?”, press KEY_OK to confirm
Then the handset and base will apply default parameter settings and make a software RESET.
Default parameter Value
Handset name TBD
Low battery indicator ON
Out of range indicator ON
Key click ON
Auto answer ON
INT melody 1
INT volume 3
EXT melody 1
EXT volume 3
ear volume 3
Language English
Phonebook Empty
CLID list Empty
Redial list Empty
PIN CODE 0000
PAUSE 3 s
dial mode DTMF(Tone)
Key lock OFF
CLOCK 00 :00
ALARM OFF
Default values in handset and base are defined by EEPROM settings [1]. So they can be adjusted for
each country.
4.3 HANDSET
• Select "HANDSET"
4.3.1 BEEP
Beep features
The handsets may or may not emit beeps while the keys are pressed , the batteries are low and when
the handset is out of range of the base.
4.3.1.1 KEYTONE
• Select "KEYTONE" and validate
• Select “ON” or “OFF” and validate
4.3.1.2 LOW BATTERY
• Select "LOW BATTERY" and validate
• Select “ON” or “OFF” and validate
4.3.1.3 OUTRANGE
• Select "OUT RANGE" and validate
• Select “ON” or “OFF” and validate
4.3.2 INT RING VOL
This menu enables you to adjust handset ring volume (intern melody)
20 of 25