User's Manual

Table Of Contents
Unanswered and answered calls are stored in the CLIP list of each handset independently (in
EEPROM).
Note: any new CLIP call will be stored in EEPROM .
Size storage
Each entry will store:
¾ The call number (20 digits)
¾ The caller name (12 digits) if the network send it
¾ The date and hour of the call
Storage sequence
The CLIP information that has been received during incoming alert phase (calling number, name
date/hour) is stored then displayed.
If the new call entries, The
icon will flash (480ms ON/OFF) and will off after all new call is read.
Note: The new message indication is reset at power up, so the icon is always off after a reset.
MMI operation
To retrieve the entries:
1. Press KEY_ UP/CLIP or KEY_ DOWN/CLIP to enter the call list. The
icon will stay ON
for Unanswered Calls and the
icon will stay ON for Answered Calls. If the list is already
empty, then “EMPTY” is displayed
2. Scroll through the calls using the up KEY_UP/CLIP and down KEY_DOWN/CLIP arrows.
3. You will find the different fields of the entry:
If the call is unanswered and unviewed. The
and icon will stay ON. The
will be turned off after it is viewed.
If a matched number found in phonebook memory , the corresponding name will be
shown otherwise if the caller name is available, the caller name will be displayed. If
both are not available, the caller number is displayed first.
Press KEY_OK, the first 12 digits of caller number is displayed , press KEY_OK again
to check the remaining digits ( if more than 12 digits )
4. Press KEY_OK The date and hour is displayed if any
5. When the CLIP found no matched number in Phone Book and Calling Number is present,
when press KEY_OK again , CLIP data can be stored into phone book ( see 3.5.6 )
To select another call list, simply press KEY_UP/CLIP or KEY_DOWN/CLIP . Error tone will be
sounded if reach the top or bottom of the list.
To return to the previous menu, press KEY_MEM/EXIT.
To dial out number just simple press
KEY_HOOK
3.7.4 Delete one CLIP list
Press KEY_CLEAR and “DELETE ?” appears.
There you can either press KEY_OK and CLIP deleted, or presses
KEY_MEM/EXIT to cancel the delete operation.
3.7.5 Delete all CLIP list
Long press KEY_CLEAR and “DELETE ALL?” appears.
There you can either press KEY_OK and all CLID are deleted, or press
KEY_MEM/EXIT to cancel the delete all operation.
To return to the previous menu, press KEY_MEM/EXIT
11 of 25