User's Manual
Table Of Contents
- USER_MENU.pdf
- USER_MENU.pdf
- Handset description
- Base description
- Main User interface
- Call User interface
- MENU Settings
- Prefix dialling
- Quick default settings
- Subscribe a new handset
- Test modes
- Specifications
- USER_MENU.pdf
3.7 Caller ID (CLIP) features
3.7.1 General features
The phone supports CLIP DTMF and FSK type I and II. See 8.1 for more details.
3.7.2 Caller ID display
Note: Caller identification is only available if you have subscribed to this service with your network
operator.
During the incoming alert:
The CLIP information is displayed if they are provided.
Order of display:
• Phonebook name and calling number alternately if the number matches with the CLIP calling
number
• CLIP calling name and calling number alternately if the network is transmitted. However, if the
number is match with one of phonebook memorized number, it shall use phonebook
memorized name.
• CLIP calling number
• Number matching method is as follows.
- If the one of number which CLIP or phonebook is less than 5 digits, it will not compare.
(If the one of phonebook number is 1234, this number will not use for number
matching)
- If the CLID received 10 digits and phonebook number is 8 digits, CLID last 8 digits will
use for the matching with that phonebook number. And if the CLID is 8 digits and
phonebook number is 10 digits, Phonebook number last 8 digits will use for the
matching with that CLID number.
The following special network messages are managed and displayed at the place of calling number:
Message CLIP type Meanings
WITHHELD FSK type I & II The caller hides its identity
UNAVAILABLE FSK type I & II Network failure, the calling number can’t be transmitted
Special caller texts display format:
Display CLIP TYPE Caller texts from network
WITHHELD FSK type I & II PRIVATE
UNAVAILABLE FSK type I & II UNAVAILABLE
INT NATIONAL FSK type I & II INTERNATIONAL
OPERATOR FSK type I & II OPERATOR
PAYPHONE FSK type I & II PAYPHONE
RINGBACK FSK type I & II RINGBACK
The
icon will stay during all incoming alert phase or if you answer the call.
The call timer display will come again after 15 seconds if no key pressed.
During standby mode:
The
icon will flash if unanswered CLIP(s) in call list, icon will be off after all unanswered
call is read.
3.7.3 Recall CLIP list
10 of 25