User's Manual

Table Of Contents
2.6 MENU mode
Refer to MENU settings
2.7 Phonebook mode
Refer to phonebook
2.8 Redial list mode
Refer to redial features
2.9 CLIP mode
Refer to Caller ID (CLIP) feature
2.10 Charging mode
Refer to Charging conditions
2.11 Busy mode
When one Handset is TALK, another handset’s “EXT” icon, and TONE_BUSY in earpiece if press
KEY_HOOK
2.12 Power down
Make a long press on KEY_R/POWER, and the handset power down.
Press and hold KEY_R/POWER for 5 seconds to wake it up.
When the handset wakes up, the clock time data shall be transferred from base.
3 Call User interface
3.1 Incoming call
Display
The display shows "CALL" and EXT icon blinks (0.5 s ON/OFF), if caller ID information is available
(see 3.5), caller name or number is displayed.
Both the Talk indication LED and key backlight shall be flashed during ringing. (0.25 s ON/OFF)
And LCD backlight shall be turned on.
Handset and base ringer melody and level as MENU setting.
Note 2: It is possible to change ring volume during the incoming alert by using KEY_UP/CLIP and
KEY_DOWN/CLIP keys.
The ring volume will be displayed as “VOLUME n” (1<=n<=5) or “VOL OFF” during 8 s unless
KEY_HOOK
is pressed.
Incoming alert phase:
The incoming call phase begins with the first ring (ALERT_ON) signal of the handset and stops:
If the user take the call (see operation)
If the call is not answered and the caller release its call or another parallel phone answers.
EXT icon and LEDs will stop flashing after FTXX_LINE_EXPIRY.
The Base ring alert is synchronized with the PSTN ring ON/OFF pattern.
3.1.1 To answer the call:
Press
KEY_HOOK
.
Simply lift the handset from the cradle.
HOOK_IND icon will be displayed.
6 of 25