User's Manual

ANSWERING MACHINE (cont.)
Notes:
1. When the answering machine takes the line (see screen E2) pre-set OGM is played. This can be default / personal answer and record,
or default / personal answer only OGM. At this time the TAM recording icon (red dot) will flash on the display.
2. Incoming messages can be up to 3 minutes in length. If a message being left fills the 3 minutes, the answering machine will end the
call.
3. Press Screen (KEY_SOFT_1) on the handset to listen to the message being left by the caller - this activates the earpiece but not the
microphone (see screen E2). Once one of the handsets is screening the call, the other handsets revert to idle.
4. Call screening can only be carried out at the handset in handsfree mode. Whilst the user is screening the call, pressing KEY_TALK
when the OGM is playing or the caller is leaving a message will answer the call.
5. To exit call screening without speaking to the caller, press End (KEY_SOFT_2) on the display (see screen E3).
6. To speak to the caller, press KEY_TALK. Message recording is stopped and the in call screen is presented.
7. If the memory becomes full when a caller is leaving a message, "Memory Full" or v14 voice prompt will be played and the call ended.
The answering machine does a soft switch to answer only mode, playing the answer only OGM and showing memory full indication on
the idle screen until messages are deleted and space becomes available. Once when memory becomes available the answering
machine switches back to answer and record mode.
8. User can play all or selective play messages.
9. To selective play message - select Play from screen E8 or E146 and press KEY_UP and KEY_DOWN to highlight the message then
press Play (KEY_SOFT_1) to play the messages (see screen E9 or E147).
10. If Play is selected from screen E146, the handset will list all messages with the most recent message highlighted on the first line of
the display. Press KEY_DOWN will move the highlight down the list - backward chronologically.
11 . New messages are marked with a yellow star (see screen E9). Once a message has started to play, its "new message" tag will be
removed and it will become an old message when the session ends.
12. If Play (KEY_SOFT_1) is pressed on E147, the handset will start to play Message 5.
During message playback, the TAM play icon (green triangle) will flash on the display (as per screen E10).
13. If available the number or name (if the number matches an entry in the phonebook) of the caller is displayed during message
playback.
If the user does not subscribe to caller display, the message number is displayed in place of the CLI or name, e.g. "Message 1".
When a memo is playing, the word "Memo" replaces the name or number of the caller. The time and date that the memo was recorded
is displayed beneath it.
14 . The time and date that the call/message was received are also displayed.
The format of the time and day stamps played at the beginning of each message is the number or name (if available), the day (DD/MM
or MM/DD depending on EEPROM configuration) and then the time (HH:MM am/pm or HH:MM depending on EEPROM configuration).
If the date the message was recorded is the same as the current date, "Today" is played instead of the day and date. If the date of
the message is the day before the current date, "Yesterday" is played instead of the day and date.
15. During message playback, press KEY_UP or KEY_DOWN to adjust volume (see screen E10). When no further button is pressed for 2
seconds the display returns to the relevant message screen.
16. During message playback, press KEY_TALK to switch between handset and handsfree playback mode.
In this case the line is not seized. If the user wants to make a call they have to stop message playback first.
17. During Play or Play All messages - press Options (KEY_SOFT_1) for the following options:
Pause - to pause current message. Press Resume (KEY_SOFT_1) to resume playback (see screen E14)
Repeat Message - to replay current message
Play Next - to play next message
Play Previous - to play previous message
Delete - to delete current message - the display prompts "Deleted" (see screen E32). Message is deleted
immediately.
18. During Play or Play All messages - press the following keys for the following options:
KEY_1 - to pause current message
KEY_2 - to resume playback of current paused message
KEY_3 - to replay current message
KEY_4 - to play next message
KEY_5 - to delete current message - the display prompts "Deleted". Message is deleted immediately.
KEY_6 - to play previous message
19 . On screen E149, if Play Next is selected via the Options (KEY_SOFT_2) menu - the next message down the list is played. In this
case it is Message 4.
If Message 5 is the first message received on the base (or last message on the list), when Play Next is selected the handset will
return to the message list.
20 . On screen E149, if Play Previous is selected via the Options (KEY_SOFT_2) menu - the next message up the list is played.
If Message 5 is the last message received on the list, the handset will start to play Message 5 again.
21 . If there are no messages when Play / Play All messages is selected:
For product without voice prompts:
The handset will prompt "No Messages" (see screen E144) and return to Answer Machine sub menus.
For product with voice prompts:
" You have no messages" or v7 voice prompt is played and the display prompts "No Messages" and returns to Answer Machine sub
menus.