User's Manual

Notes:
PHONEBOOK/CONTACT (cont.)
36 . Some SIM cards can save up to 20 characters in the name
field and some 12 characters.
If the maximum character allowed for the name field on the
handset is 12 - then the first 12 characters are copied.
The same applies to the number field.
37. There is no indication that a SIM is inserted, but during
phonebook transfer the Power In Use / Event LED will
flash.
38 . During the transfer it is not possible to use the base
functionality.
All base button presses are ignored. The SIM copy can
only be stopped at the controlling handset.
39 . When copying entries from SIM to phone, if a SIM contact
contains only the number fields - the number field will be
copied to both the name and number field on the handset.
The unnamed contacts will appear at the end of the list
(see screen P144).
40 . It is permissible for duplicate entries with the same name
NOT number to be stored as a result of SIM copying (or
even with manual input). In other words, it is possible to
stored two or more entries with the same contact name.
41 . Multiple SIM card transfer can be carried out. When
copying SIM card in either direction, entries are appended
to the existing list of contacts, rather than overwriting the
contents.
Contact with same name but different number will be copied.
Contact with different name and different number will be copied.
Contact with same name and same number will not be copied.
Contact with different name but same number will not be copied.
42. Dialling Codes feature allows correct conversion of SIM
contacts beginning with international codes.
For example, a contact saved on SIM with [phone]
where: (+) is the international code, and
(44) is the country code
On the DECT phone, the settings will be:
International Code = 00
Country Code = 44
Local Code = 0
After SIM copy, + and 44 will be stripped off and replaced
by the local area code (0) - the entry copied will then
appear on the handset as 02074030201.
This feature can be hidden in EEPROM.