User's Manual

CALL HANDLING (cont.)
CONFERENCE CALLS
To start a conference call:
1. On your handset (handset 1), press KEY_INT
followed by the handset number you want to call.
2. Press OK (KEY_SOFT_1), the call attempt is made
immediately.
Or press Back (KEY_SOFT_2) to cancel the call
request.
3. "Internal Call Handset X" is displayed on handset 1
where X is the called handset number, in this case it
is handset 2.
4. To answer the call on handset 2, press KEY_TALK.
5. Once handset 2 has answered the call, the softkeys
on handset 1 will change to Join (KEY_SOFT_1) and
End (KEY_SOFT_2).
6. Press Join (KEY_SOFT_1) or long press on
KEY_HASH on handset 1 to join the two calls.
Handset 1 will display "Conference Call" follow by the
call timer initiated from the first call (see screen
D25).
Handset 2 will display "Conference Call" follow by the
call timer initiated from the time the call is answered.
On handset 1:
Mute Contact
Handset 1
D25
Conference Call
02:34
On handset 2:
Mute Contact
Handset 2
D26
Conference Call
00:01
CALL WAITING
1. While you are engaged on an external call if another
call arrives - you will hear a beep sound and the
display is presented as screen D27 and D28. If the
number matches an entry in the contact list - the
name will alternate with the number on the display.
2. To swap between two calls, press KEY_R (or KEY_R +
KEY_2 depending on your network) to speak to
second caller while your first call is put on hold.
On handset 1:
Mute Contact
Handset 1
D27
Call Waiting
02074030201
Mute Contact
Handset 1
D28
Call Waiting
SunCorp UK
KEY_TALK
Mute Contact
Handset 1
D29
SunCorp UK
05:30
3. When second call is answered - the caller's number
(or name if the number matches an entry in the
phonebook) is displayed together with the call timer of
the first call on hold.
4. If KEY_END is pressed at any time - the line reverts
back to the first caller on hold.