User's Manual

CALL HANDLING
MAKING CALLS
To make a call (Pre Dialling):
1. Enter your destination number and press KEY_TALK.
If you make a mistake, press Clear (KEY_SOFT_2).
2. Press KEY_TALK to dial out.
To make a call (Manual Dialling):
1. Press KEY_TALK to get the dial tone.
2. Enter your destination number.
Options Clear
Handset 1
D0
02074030201
D1
Select Back
Save
Send Message
Options
KEY_SOFT_1
Options Clear
Handset 1
D4
08000
54468911455894460
Mute Contact
Handset 1
D5
Calling
. . . 11455894460
KEY_TALK
Mute Contact
Handset 1
D6
. . . 11455894460
00:01
Mute Contact
Handset 1
D2
Calling
SunCorp UK
KEY_TALK
Mute Contact
Handset 1
D3
02074030201
00:05
Note:
- If KEY_TALK is not pressed to dial the digits and no further
digit is dialled - when the display timeouts it returns to idle
with no dialled digits.
- In both manual and preparatory dialling, digits are dialled
as they are entered. No cursor is presented.
- To insert a pause in pre-dial mode, press and hold K E Y _U P
and a P will appear on the screen.
- Recall, * and # can be entered with a short press on
relevant key.
- During preparatory dialling, press Options (KEY_SOFT_1) -
user can choose to save the number to phonebook, or, send
a text message to the number dialled (see screen D1).
- In preparatory dialling the number being entered for dialling
is presented over two lines. Once the in call screen is
presented, only one line is used to display the number, with
the three dots displayed at the beginning of the number to
indicate more of the number scrolling off to the left (see
screen D5 and D6).
- If the number dialled matches an entry in the phonebook
the name is displayed (see screen D2).
If there is no name match, a single line of digits is
displayed with three dots to the left of the number to
highlight there are more digits at the beginning of the
number.
- If entering digits takes the content up to the maximum of
32 allowed in the field, further CCITT button presses are
ignored, along with the error tone.
- The call timer will be displayed 2 seconds after KEY_TALK
is pressed starting at 00:01 (see screen D6).
- If the call timer is replaced by other screens during a call,
the timer will continue to count in the background. When
the timer is displayed again, the incremented time is
displayed.
To make a call in Handsfree Mode:
1. Press KEY_TALK twice to get the dial tone.
2. Enter your destination number. Your call can be heard
over the handset's loudspeaker.
Note: A small speaker icon will appear on display dashboard
(see screen D3).
To make a call from local Contact List:
1. Press KEY _DOWN to enter your local contact.
2. Press K EY_UP or KEY _DOWN to highlight the contact
you want to call.
3. Press KEY_TALK to dial out.
To make a call from Calls List:
1. Press Menu (KEY_SOFT_1) to enter the menu list.
Text Messaging is highlighted.
2. Press KEY_DOWN to Calls List menu and press Select
(KEY _S O F T _ 1 ).
3. Press KEY_UP or KEY_DOWN to highlight the calls
list you want.
4. Press KEY_UP or KEY_DOWN to highlight the entry
you want to call.
5. Press KEY_TALK to dial out.
ANSWERING CALLS
To answer an incoming call:
1. Press KEY_TALK to answer, or
2. If Auto Talk is set to ON you can simply pick up your
handset from the cradle to take the call.
Quite
Handset 1
D7
External Call
Quite
Handset 1
D9
External Call
SunCorp UK
Mute Contact
Handset 1
D8
External Call
00:19
Mute Contact
Handset 1
D10
SunCorp UK
00:19
KEY_TALK KEY_TALK
Note:
- During the ringing of an incoming call - it is possible to
silent the ringer on your handset by pressing Quiet
(K E Y _ S O F T _ 1 ).
If Quiet (KE Y _SO F T _1) is selected on an incoming call
screen (see screen D7 or D9), the handset ringer for that
handset is temporarily switched off and the Quiet
(KE Y _SOF T _1 ) label is removed. The call continues to be
displayed on the screen and will still be announced
audibly at any other handsets and the base. Once the
handset reverts to idle, the ringer is switched back on.