User's Manual

(1) Press and hold the button on the base station for 3 seconds.The indicator light on

the base will flash to show the registration process has begun. The base station is able to

accept registration from a handset within 60 seconds. If no key is pressed within 10 seconds,

the registration procedure will be aborted.

(2) At the handset, press Menu the scroll down to Registration then press Select.

(3) Press Select again to choose Register Handset.

(4) Scroll to select the Base and press Select.

(5) Enter the system PIN (the default setting is 0000) and press OK to start registration.

If the base is found and the PIN is correct, the unused handset numbers will be shown and

you can select a handset number by entering the number directly.

If the PIN is incorrect, Incorrect PIN will be displayed and the handset returns to standby

mode.

A long confirmation tone is emitted to indicate successful registration and the screen displays

Handset Registered before returning to standby mode.

If the registration fails, the display shows Registration Unsuccessful.Try repeating the regis-

tration process.

If registration is unsuccessful make sure that there are not 5 handsets already registered to

the base. If there are, you must unregister one of the handsets in order to register the new

one.