User's Manual

BASE SETTINGS

Set the dialing mode

The default dialing mode setting is suitable for your country and network operator. It is

unlikely that you should need to change this setting.

When connected to certain switchboards or public exchanges, you may need to switch from

tone to pulse dialing.

(1) Press Menu, then scroll down to Settings and press Select.

(2) Scroll down to Set Base and press Select.

(3) Scroll to Dialing Mode and press Select.

(4) Scroll to Tone or Pulse.

(5) Press Save to confirm.

(6) Press Back to return to standby.

To set ring priority

If you have more than one handset, all handsets normally ring at the same time. You can set

one handset to ring 2, 4 or 6 rings before the others.This gives one person the chance to act

as a receptionist and answer incoming calls first. Calls can then be transferred to other hand-

sets.

(1) Press Menu, then scroll down to Settings and press Select.

(2) Scroll down to Set Base and press Select.

(3) Scroll to Ring Priority and press Select.

(4) Scroll to All Handsets or Select Handset and press Select.

(5) If you chose Select Handset, scroll to the handset number you want to ring first and

press Select.Then press to choose the number of rings that will be heard before the

other handsets start ringing and press Select again.

(6) Press Back to return to standby.