User's Manual

In Call Options
Options Clear
Page 6
To adjust the earpiece volume during a call:
1. Press UP to increase the volume or DOWN to decrease the volume.
To mute a microphone during a call:
1. Select Mute using Soft Key 2 to mute your handset microphone.
2. You can turn the microphone back on by selecting UnMute using Soft
Key 2 again.
To switch between handset and handsfree mode:
1. Press TALK during the call to switch your handset to handsfree mode.
2. Press TALK again to switch back to handset mode.
Options Mute
Handset 1
Stephen
03:56
To make an internal call:
This section only applies when you have more than 1 handset registered to the same
base.
1. On your handset (Handset 1) press the INT key followed by the
handset number you want to call, for example Handset 2. The following is displayed:
2. To answer the call on Handset 2 press TALK.
3. If the handset you are trying to make an external call to is engaged, the display will
return to standby after 2 seconds. Try again later.
Note: If two handsets are engaged on an internal call and there is an incoming Skype
call any free handsets will ring. The handsets in use will present beeps in the earpiece
to notify you. The callers information will be displayed on ALL the handsets.
You will need to end the internal call before the Skype call can be answered.
Internal Calls
On Handset 2:On Handset 1:
Options Mute
Handset 1
Internal Call
Handset 2
Quiet
Handset 2
Internal Call
Handset 1