User's Manual

MAKING CALLS
To make a PSTN call (Pre Dialling):
1. Make sure your KEY_SOFT_2 is labeled Phone.
2. Enter your destination number and press KEY_TALK. If you make a mistake, press
KEY_CLR.
3. Press KEY_TALK to dial out.
Note: To insert a pause in pre-dial mode, press and hold KEY_UP and a P will appear on the
screen.
To make a PSTN call (Manual Dialling):
1. Make sure your KEY_SOFT_2 is labeled Phone.
2. Press KEY_TALK to get the dial tone then enter your destination number.
To make a PSTN call (Manual Dialling) in handsfree mode:
1. Make sure your KEY_SOFT_2 is labeled Phone.
2. Press KEY_TALK twice to get the dial tone then enter your destination number. Your
call can be heard over the handset's loudspeaker.
To make a PSTN call (from local Contact List):
1. Make sure your KEY_SOFT_2 is labeled Phone.
2. Press KEY_DOWN to enter your local contact.
3. Press KEY_UP or KEY_DOWN to highlight the contact you want to call.
4. Press KEY_TALK to dial out.
To make a PSTN call (from PSTN Calls List):
1. Press Menu (KEY_SOFT_1) to enter the menu list. Phonebook menu is highlighted.
2. Press KEY_DOWN to Calls List menu and press Select (KEY_SOFT_1).
3. Press KEY_UP or KEY_DOWN to highlight the entry you want to call.
4. Press KEY_TALK to dial out.
To make a Skype to Skype call:
1. Make sure your KEY_SOFT_2 is labeled
Skype.
2. Press KEY_DOWN to enter your Skype buddy list.
3. Press KEY_UP or KEY_DOWN to highlight the buddy you want to call.
4. Press KEY_TALK to dial out.
To make a SkypeOut call (Pre Dialling):
1. Make sure your KEY_SOFT_2 is labeled Skype.
2. Enter your destination number and press KEY_TALK. If you make a mistake, press
KEY_CLR.
3. Press KEY_TALK to dial out.
To make a SkypeOut call (from Skype Buddy List):
1. Make sure your KEY_SOFT_2 is labeled
Skype.
2. Press KEY_DOWN to enter your Skype buddy list.
3. Press KEY_UP or KEY_DOWN to highlight the SkypeOut contact you want to call.
4. Press KEY_TALK to dial out.
ANSWERING CALLS
To answer a PSTN, Skype or a SkypeIn call:
1. Press KEY_TALK to answer.
Or if Auto Talk is set to ON you can simply pick up your handset from the cradle to take the
call.
Note: During the ringing of an incoming PSTN or Skype call - it is possible to silent the ringer
on your handset by pressing Quiet (KEY_SOFT_1). See screen P55 and P62.
If Quiet (KEY_SOFT_1) is selected on an incoming call screen, the handset ringer for that
handset is temporarily switched off and the Quiet (KEY_SOFT_1) label is removed. The call
continues to be displayed on the screen and will still be announced audibly at any other
handsets and the base. Once the handset reverts to idle, the ringer is switched back on.
ENDING CALLS
To end a PSTN, Skype or a SkypeIn call:
1. Press KEY_END will end current active call.
Note: By putting the handset back on the cradle will end all calls.
IN-CALL OPTIONS
To adjust earpiece volume during call:
1. Press KEY_UP to increase the volume or KEY_DOWN to decrease the volume.
To mute a microphone during call:
1. Press Mute (KEY_SOFT_2) during call to mute your handset microphone.
2. Press UnMute (KEY_SOFT_2) to turn the microphone back on.
To switch between handset and handsfree mode:
1. Press KEY_TALK during call to switch your handset to handsfree mode.
2. Press KEY_TALK again to switch back to handset mode.
Note: If when a call is in progress either in handset or handsfree mode and the headset (if
available) is plugged in the call is transferred to the headset and the speakers on the handset
are muted. Whilst a headset call is in progress pressing KEY_TALK to activate handsfree will
be ignored.
To view your local contact list during PSTN call:
1. To access contact list during call, press Options (KEY_SOFT_1) and select Contact.
INTERNAL CALLS
To make an internal call:
1. On your handset (handset 1), short press KEY_INT_R followed by the handset number
you want to call, the call attempt is made immediately while external call is put on hold.
2. "Internal Call Handset X" is displayed where X is the handset number.
CALL H AN DLI NG ( con t.)
pa ge 8
On handset 1: On handset 2:
Options Mu t e
H andset 1
P8 7
I n t e r na l Ca ll
Ha n d se t 2
Qu ie t
Han dse t 2
P8 8
I nt ern a l Call
Ha n d set 1
3. To answer the call on handset 2, press KEY_TALK.
4. If you try to make an internal call to a handset (handset 2) which is already engaged on
an internal call, or is not available, the display will return to standby after 2 seconds.
5. If two handsets are engaged on an internal call and an Skype/PSTN external call is
received, any handsets that are available will ring. The handsets involved in the internal
call will present beeps in the earpiece. The caller information or name match (to your
local contact list or Skype buddy list) will be presented on all handset displays.
The internal call must be ended before the external call can be taken. Then the external
call will be presented on the handset again for the user to take the external call.