User's Manual

MAKING CALLS
To make a Skype to Skype call:
1. Press KEY_DOWN or KEY_SOFT_2 to enter your Skype buddy list.
2. Press KEY_UP or KEY_DOWN to highlight the buddy you want to call.
3. Press KEY_TALK to dial out.
To make a SkypeOut call (Pre Dialling):
1. Enter your destination number and press KEY_TALK. If you make a mistake, press
KEY_CLR.
2. Press KEY_TALK to dial out.
To make a SkypeOut call (from Skype Buddy List):
1. Press KEY_DOWN or KEY_SOFT_2 to enter your Skype buddy list.
2. Press KEY_UP or KEY_DOWN to highlight the SkypeOut contact you want to call.
3. Press KEY_TALK to dial out.
Making a SkypeOut Call from Local Contact List:
1. Press Menu (KEY_SOFT_1), Contact menu is displayed.
2. Press Select (KEY_SOFT_1) to open your phonebook menu.
3. Search is highlighted, press Select (KEY_SOFT_1).
4. Scroll to the contact you want to call and press Options (KEY_SOFT_1).
5. Scroll to SkypeOut Call and press Select (KEY_SOFT_1) to call selected contact name
via Skype.
ANSWERING CALLS
To answer a Skype or a SkypeIn call:
1. Press KEY_TALK to answer.
Or if Auto Talk is set to ON you can simply pick up your handset from the cradle to take the
call.
Note: During the ringing of an incoming Skype call - it is possible to silent the ringer on your
handset by pressing Quiet (KEY_SOFT_1). See screen P47 and P48.
If Quiet (KEY_SOFT_1) is selected on an incoming call screen, the handset ringer for that
handset is temporarily switched off and the Quiet (KEY_SOFT_1) label is removed. The call
continues to be displayed on the screen and will still be announced audibly at any other
handsets and the base. Once the handset reverts to idle, the ringer is switched back on.
ENDING CALLS
To end a Skype or a SkypeIn call:
1. Press KEY_END will end current active call.
Note: By putting the handset back on the cradle will end all calls.
IN-CALL OPTIONS
To adjust earpiece volume during call:
1. Press KEY_UP to increase the volume or KEY_DOWN to decrease the volume.
To mute a microphone during call:
1. Press Mute (KEY_SOFT_2) during call to mute your handset microphone.
2. Press UnMute (KEY_SOFT_2) to turn the microphone back on.
To switch between handset and handsfree mode:
1. Press KEY_TALK during call to switch your handset to handsfree mode.
2. Press KEY_TALK again to switch back to handset mode.
Note: If when a call is in progress either in handset or handsfree mode and the headset (if
available) is plugged in the call is transferred to the headset and the speakers on the handset
are muted. Whilst a headset call is in progress pressing KEY_TALK to activate handsfree will
be ignored.
INTERNAL CALLS
To make an internal call:
1. On your handset (handset 1), short press KEY_INT_R followed by the handset number
you want to call, the call attempt is made immediately while external call is put on hold.
2. "Internal Call Handset X" is displayed where X is the handset number.
CALL HANDLING (cont.)
page 6
On handset 1: On handset 2:
Options Mute
Handset 1
P72
Internal Call
Handset 2
Quiet
Handset 2
P73
Internal Call
Handset 1
3. To answer the call on handset 2, press KEY_TALK.
4. If you try to make an internal call to a handset (handset 2) which is already engaged on
an internal call, or is not available, the display will return to standby after 2 seconds.
5. If two handsets are engaged on an internal call and an external Skype call is received,
any handsets that are available will ring. The handsets involved in the internal call will
present beeps in the earpiece. The caller information or name match (to your local
contact list or Skype buddy list) will be presented on all handset displays.
The internal call must be ended before the external call can be taken. Then the external
call will be presented on the handset again for the user to take the external call.
SKYPE CONFERENCING
While on a Skype call, it is possible to invite another buddy from your Skype buddy list to join
your call.
To start a Skype conference call with another Skype buddy:
1. While on a Skype call on your handset (handset 1) to invite another buddy from your
Skype buddy list, press Options (KEY_SOFT_1) and select Invite. You will be
presented with the Skype buddy list.
2. Press KEY_UP or KEY_DOWN to highlight the buddy you want to invite to join you call.
3. Press Invite (KEY_SOFT_1) to add the buddy to your conference call.
4. Up to 5 participants including the conference host can be on a conference call at one
time.
5. Only one Skype conference call can be held at one time.
SKYPE CALL OPTIONS
While you are on a Skype call the following options are available:
- Swap Call
- Join Conference
- Invite
- Hold Call
- Start Call
- End call
Swap Call
This option is used to swap between calls and is offered when there is more than one
active Skype call.
Join Conference
This option is used to invite current active call to join conference call on hold.
This option is not offered if you are already on a conference call (see screen P12 or P24).
Invite
This option is used to invite another buddy to join your current call.
If there are already 5 participants on the conference call Invite option will be greyed out
(see screen P29).
If there is already one conference call on hold while you are on a separate call with
another buddy - pressing Options (KEY_SOFT_1) will show Invite as greyed out option
(see screen P21 or P27).
Hold Call
This option is used to put current call on hold.
To resume the call, press Resume (KEY_SOFT_2) or select Resume via the Options
(KEY_SOFT_1). See screen P35 and P36.
Start Call
This option is used to start a new Skype call when you are already on one or more Skype
calls.
Up to four separate Skype calls can be made at one time. Start Call option is greyed out
when there are four separate Skype calls.
While on a Skype call if Start Call is selected - you will be presented with the buddy list
screen to select another buddy you want to call. Your current call is put on hold while a
new call is initiated.
End Call
This option is used to end a call with a specific buddy or end your current call if it is the
only call.
CALL WAITING
1. While you are on a Skype call if another Skype call arrives - you will hear a beep sound
and the display is presented as screen P17.
At this time, the two softkeys will change from Options (KEY_SOFT_1) and Mute
(KEY_SOFT_2) to Answer (KEY_SOFT_1) and Reject (KEY_SOFT_2).
Press
Answer (KEY_SOFT_1) to take the call and put current active Skype call on hold.
If the call is answered the two softkeys will change to Options (KEY_SOFT_1) and Mute
(KEY_SOFT_2) where Options refer to Skype in-call options.
Press Reject (KEY_SOFT_2) to ignore the call.
OTHER CALL HANDLING NOTES
1. If the base is in use either on a call or by one of the other handsets, if another handset
user tries to access base functionality, the display prompts "Not Available" for 2 seconds,
along with the error tone before reverting to idle.
2. When one of the handsets (handset 1) is engaged on an external call, it is not possible for
the other handsets to initiate a new Skype call at the same time.