Installation Guide

27
4"
55
56
Afterraftershavebeeninstalledthepergolashould
looklikethis.
Positiontheremainingrafters,ttingtheminsidethe
rafterclips.DO NOTattachany,untilallhavebeen
centeredandpositioned.Adjusttheraftersas
needed,makesureallrafterslineupperfectly
straightbeforesecuringtorafterclips.
Beforemovingon,measurethebeamsattheseam
tomakesurethespacingbetweenthebeamsis4".If
needed,temporarilyinserta4"spacerwhileattaching
remainingrafters.
Repeat steps 49-52
to center rafter and
secure rafter to
rafter clips.
54