Installation Guide

19
25
7 1/4"
Measureandmarkaline71/4"infromtheendof
beam.Repeatonotherendofbeam.Note: Bottom
edge of beam is determined by the logo plate
orientation.
Repeat Steps 17-26
for remaining beams.
27
5"
1 1/2"
26
U
Measureandmarkholes5"and11/2"frombottom
ofbeam.Predrillholesmakingsurethatthehole
thatis11/2"fromtheedgeistowardsthebottomof
thebeam.
24
6"
X
Fastena1"screw(X)onthetopedgeofbeam,
6"fromtheendofthebeam.
Note: Top edge of beam is determined by the logo
plate orientation.