Installation Guide

12
Optional
high-wind bracket
(1/2" drill bit)
(not included)
3b
4
A
A
5
1
1
2
EE
Drillholesusingthe3/16"concretedrillbit(V)
provided.
Forhigh-windareas,usea1/2"concretedrill
bit(notincluded)todrillholesaminimumof5"deep.
Positionwoodposts(A)sothattheyareparallel
witheachother.Usingastring,alignthetopsof
theposts.Thiswillensurethatwhenthebeamsare
attached,theywilltproperlyagainsttheposts.
Note: The bottom of the posts may not be perfectly
parallel. This is common and will not be visible once
the vinyl columns are in place.
Positionwoodpostoverholesandplumbusinga
fourfootlevel.Ifneeded,usesuppliedwashersto
plumbposts.Note: The vinyl column covers bracket,
this is your last opportunity to secure and plumb the
posts.
3a
(3/16" drill bit)
Standard bracket
(3/16" drill bit)
V