Installation Guide

10
Thepostwiththehigh-windbracketshouldlookas
pictured.
Attachthehigh-windbracket(C)usingthescrews
thatwereremovedinStep1.Thehigh-windbracket
usesanadditional14screwsthatareincluded.
3
C
A
Slidethehigh-windbracket(C)ontothebottomof
thepost(A),makingsurethatitissnugagainstthe
bottom.
2
C
A
Ifyouhavechosentopurchasethehigh-wind
brackets(C),removethescrewsintheexisting
brackets(B).Setbracketsasideandsaveallscrews
forlater.
x10
1
B
A
Optional High-Wind Bracket Pre-assembly