Instructions / Assembly
31
1
1
1
x3x3
2
55
Q
End view
Y
Y
Q
Q
54
x2x2
2
3
1
1
53
LL
D
E
1
1
1
2
x3x3
52
Q
Lay left roof (Q) directly over the three tabs on right side
of front header (K). With left roof channel seated over/
on header tabs, pull roof downward at each header tab
until roof snaps in place.
Pull down each lower corner of roof from outside. From
inside shed, attach tabs on side panel (E) and front left
corner (D) to roof panel with three screws (LL).
Press edge of left roof (Q) into channel on truss leg (Y).
Lay remaining left roof (Q) directly over three tabs on
the left side of the rear header (L). With left roof channel
seated over/on header tabs, pull left roof downward at
each header tab until roof snaps in place.
-i`ÊÃÃiLÞÉ,vÊVÌÕi`®