Instructions / Assembly

13
1
1
3
2
7
HH
FF
x2x2
x2
x2
x2
Z
Y
Y
Attach truss cross beam (Z) to two truss legs (Y) using
two hex bolts (FF) and two nuts (HH). Stand truss and
check cross beam is level.
1
3
2
6
W
Y
Y
GG
HH
x2
x2
x2
Truss Pre-Assembly
Parts/hardware needed for truss pre-assembly are shown on pages 7-8.
Attach truss bracket (W) to end of one truss leg (Y)
with 1" hex bolt (GG) and nut (HH). REPEAT WITH
OTHER TRUSS LEG.
Note: Make sure side hole is at other end, as shown in
step 8.