Installation Guide

x12

Position one of the header beams (S) into the channel across the

front left side panel (F) and the rear left side panel (E). Using a

phillips screwdriver, secure the header beam with six screws (CC).

Repeat for the remaining header beam across the front right side

panel (B) and the rear right side panel (C)

Using the easy driver (DD), attach both back-to-roof retainers (L) to the

back panel (D) using one easy bolts each (EE). DO NOT overtighten.

Place the front roof panel (J) across the front left side panel (F) and the

front right side panel (B). Be sure the inner roof guides (K) snap fully

over the side panels.

Slide the front roof panel (J) to the rear and open position.

2019

Side View