Instructions / Assembly

Fully extend the small drawer glides on the left side panel (B) and left

divider panel (K).

Align the inner glides of one small drawer assembly (S, R) to the small

drawer glides. Insert the drawer inner glides into the extended glides

then insert the small drawer assembly fully into the cabinet.

NOTE: Once the small drawer assembly is inserted, pull the drawer out

to conﬁrm the drawer stops at full extension.

Repeat the process to install the remaining drawer assembly (S, R)

to the remaining small drawer glides on the right side panel (C) and

right divider panel (L).

Insert the grommet (QQ) into the large hole in the

counter top (O). Be sure to fully seat the grommet.

Assembly complete.

Assembly - Grommet