Instructions / Assembly

38
Fully extend the pair of large drawer glides (Y)
installed on the left side of the cabinet floor (J)
(remove tape if used).
Position one large drawer assembly (U, T) onto the
extended large drawer glides (Y). Align the mounting
holes in the bottom of the drawer assembly with the
holes in the large drawer glides.
NOTE: If not already done, pierce the six holes in the
bottom of the large drawer (U) using a Phillips head
screwdriver or other similar tool.
Secure the large drawer assembly (U, T) to the large
drawer glides (Y) using six bolts (V V), washers (WW)
and nuts (XX). Tighten securely. Do not overtighten.
Repeat steps 48 and 49 to install the remaining
large drawer assembly (U, T) to the large drawer
glides (Y) installed on the right side of the cabinet
floor (J) (remove tape if used).
2
1
U
Y
U
XX
WW
VV x6
7/16”
(VV) x12
(WW) x12(XX) x12
Assembly - Shelf, Door & Drawers (Cont.)