Instructions / Assembly

Pre-Assembly - Footrest Cap

Pre-Assembly - Sand Containers

PP x2

Insert one footrest cap (PP) into each end of the footrest (OO).

If needed, use a rubber mallet to fully set the footrest caps.

Using a funnel, ﬁll the sand containers (V) with sand or pea gravel. Install the sand container caps (RR) securely.

CAUTION: Do not ﬁll sand containers to a level more than shown or to an

approximate weight of 30 lbs. (13.6 kg).

Once the sand containers are ﬁlled and capped, lay them on their side to evenly

distribute the sand prior to installation.

V V

1 ft

/ .03 m

SAND/SABLE/ARENA