Instructions / Assembly

16
UU
C
x3
UU
L
x3
Attach one drawer glide wide base to the right side
panel (C) with three screws (UU).
NOTE: The rubber bumper-stops should be oriented
toward the back of the side panel (C). To access the
front two screw locations, line up slots in the moving
part of the wide base with the mounting holes.
Repeat for the left side panel (B) and one
additional drawer glide wide base.
Attach one drawer glide wide base to the right
divider panel (L) with three screws (UU).
NOTE: The rubber bumper-stops should be oriented
toward the back of the divider panel (L). To access
the front two screw locations, line up slots in the
moving part of the wide base with the mounting
holes.
Repeat for the left divider panel (K) and one
additional drawer glide wide base.
9
10
(UU) x6
(UU) x6
Pre-Assembly - Drawer Glides (cont.)