Installation Guide

Electric Cord Routing
Electrical cords can be routed downward through the
grommet hole, along the bar corner and out the cord slide.
Remove the grommet ( QQ) and open the cord slide ( KK).
Feed the electrical cord through the grommet hole down
along the bar corner and behind the drawers and feed the
cord plug out of the cord slide hole in the right side panel ( B).
Positing the cord into the cord cutout and slide the cord
slide closed.
HINT: Removing the small drawer and pulling out the large
drawer may help in routing a cord along the bar corner.
km*
42