Installation Guide

Fully extend the small drawer glides on the left side panel ( B) and left
divider panel ( K).
Align the inner glides of one small drawer assembly ( S, R) to the small
drawer glides. Insert the drawer inner glides into the extended glides
then insert the small drawer assembly fully into the cabinet.
NOTE: Once the small drawer assembly is inserted, pull the drawer out
to confirm the drawer stops at full extension.
Repeat the process to install the remaining drawer assembly ( S, R)
to the remaining small drawer glides on the right side panel ( C) and
right divider panel ( L).
G
Assembly - Grommet
ED
Insert the grommet ( QQ) into the large hole in the
counter top (0). Be sure to fully seat the grommet.
Assembly complete.
39