Installation Guide

Pre- Assembly - Drawers ( cont.)
o
Slide the slots in one large drawer front ( T) onto the tabs on the front of
one formed large drawer ( U). Slide until the front panel snaps into place.
From the bottom of the large drawer ( U), insert three screws ( TT)
through the large drawer securing it to the drawer front ( T).
Repeat to assemble the remaining large drawer front ( T) to
large drawer ( U).
(TT) x6
NOTE: Using a Phillips head screwdriver or other similar
tool, pierce the six holes indicated in the bottom of the
large drawer ( U).
o
Insert one drawer handle ( W) on an angle into the
top edge of the handle hole of one large drawer
front ( T). Rotate the bottom of the handle toward
the drawer front and press firmly on the center of
the handle to snap it into place.
Repeat with one handle into the remaining
large drawer front ( T).
14