Product Manual

Incorporated in Queensland A.C.N. 010 809 168 A.B.N. 81 010 809 168
BRISBANE
11-15 Oasis Court, Clontarf, QLD 4019
Phone : [phone] Fax : [phone]
E-mail : [e-mail]
www.aussietraveller.com.au
MELBOURNE
235A Barry Road, Campbellfield VIC 3061
Ph: 03 9357 6565 Fx: 03 9357 6515
E-mail: [e-mail]
I00113A1\9
Sunburst Classic Awning
User Operating Instructions
1. ROLLOUT PROCEDURE - ALL TERRAIN
POSITION
Step 1.
Unlock both arms from travel position (See Figure 1A). To
open travel locks, swivel lock away from the arm of the
awning (See Figure 1B).
Figure 1A Figure 1B
Step 2.
Loosen black rafter knobs located on back of BOTH rafters.
Step 3.
Locate Ratchet Lever behind right end of roller. Using pull
down rod move lever downward (See Figure 2). (The Ratchet
mechanism is functioning correctly if a clicking noise is heard
when rolling the awning out or in.)
Figure 2
Step 4.
Insert pull rod through loop in pull strap and pull awning
open until fully extended (See Figure 3).
Do not overextend roller.
**NB. See step B 6 overleaf.
Figure 3
Step 5.
Slide the rafter up support arm until it locks into position
over the black spring button. Tighten knob on rafter to
tension fabric (See Figure 4 & 5). Repeat other arm.
Figure 4
Figure 5