Operator's Manual

2
WARNING
• We highly recommend this product be installed by a qualied professional.
• Please do not begin installation until you have thoroughly read and understood these instructions.
• This mount supports display mounting from VESA 200x200 up to 700X500.
• This mount supports a maximum load of 175 lbs (79.5 kg).
• Ensure the ceiling will safely support the combined weight of the mount and your chosen display.
• The manufacturer does not accept responsibility for incorrect installation.
CAUTION:
These ceiling mounts are intended for use only with the maximum weight of 175 lbs (79.5 kg).
SPECIFICATIONS BOX CONTENTS TOOLS REQUIRED
• Power Drill
• 3/16” (5mm) Drill Bit
• 5/16” (8mm) Masonry Bit
• 1/2" (13mm) Wrench
• Phillips Head Screw Driver
• Ceiling Plate Assembly (1)
• Mounting Head (1)
• Adapter Plate (1/2)
• TV Arms (2/4)
• 18" Fixed Extension Pole (1)
• Hardware Kit (1)
• 3/8” Socket Wrench
• Maximum Load: 175 lbs (79.5 kg)
• Extension: 18 inches
• Stainless Steel Mounting Hardware
• Pan/Swivel Range: 360°
• Tilt Range: +0° /-20°
• Weather Resistant Coating
• VESA patterns:
200x200 up to
700X500
• 7/16” Socket Wrench
HARDWARE KIT CONTENTS
M6 x 12mm Philips
Head Screw (x4/8)
M8 x 16mm Philips
Head Screw (x4/8)
Allen Wrench 2.5mm,
Security (x1)
Allen Wrench,
4mm (x1)
M4 x
20mm Philips
Head Screw (x4/8)
M5 x 30mm Philips
Head Screw (x4/8)
M6 x 30mm Phillips
Head Screw (x4/8)
M8 x 20mm Phillips
Head Screw (x4/8)
M8 x 40mm Phillips
Head Screw (x4/8)
M8 Nylock Nut (x4/8)
M5 x 12mm Philips
Head Screw (x4/8)
M6 x 20mm Philips
Head Screw (x4/8)
Security Wrench (x1)
M5 (16 x 5.3 x 1.5mm)
Metal Washer (x4/8)
#14 x 2.5” Lag Screw (x6)
M8 (20.5 x 8.5 x 2mm)
Metal Washer (x18/30)
Locking Pin (x1/2)
M4/M5/M6 spacer:
12mm (x4/8)
M6/M8 Spacer:
17.8mm (x4/8)
M5 x 4mm Set Screw (x6)
M4 x 12mm Philips
Head Screw (x4/8)
M6 (17.8 x 6.5 x 1.5mm)
Metal Washer (x4/8)
M10 Nylock Nut (x1)
M10 x 65mm Bolt (x1)