SB-CM-T-L-BL SB-CM-DT-L-BL Weatherproof Universal Single & Dual Ceiling Mount for Large TVs INSTALLATION MANUAL
WARNING • We highly recommend this product be installed by a qualified professional. • Please do not begin installation until you have thoroughly read and understood these instructions. • This mount supports display mounting from VESA 200x200 up to 700X500. • This mount supports a maximum load of 175 lbs (79.5 kg). • Ensure the ceiling will safely support the combined weight of the mount and your chosen display. • The manufacturer does not accept responsibility for incorrect installation.
INSTALLATION Step 1: Mark Mounting Hole Locations Place the ceiling plate on the mounting surface and mark the mounting hole locations. Fig 1 Step 2: Mount the Ceiling Plate For Mounting on a Wood Joist (Fig 1) a. Drill four holes into joist using a 3/16” drill bit. Be sure to drill into the center of the joists. b. Insert four lag screws into holes through the ceiling plate and tighten down. WARNING: Tighten screws so that the ceiling plate is firmly attached, but do not over tighten.
Step 4: Attach the Mount Head a. Inserting through-bolts on adapter plate through angled slots in mounting head. Place M8 washers and nylock nuts on end of through bolts and tighten down (Fig 4). Fig 4 Fig 5 b. Screw mount head on to end of extension pole and tighten set screws (Fig 5). Step 5: Attach the TV Arms to the Display Attach the TV arms to the display using M4, M5, M6, or M8 screws.
