Operating Guide

Assemble TV Bracket

Lay the TV flat on a soft, flat surface and locate the four VESA mounting bracket holes, then determine the VESA

pattern and prepare the TV bracket and adapters accordingly.

Medium Displays (Up to VESA 400X400)

1. Assemble the four SunBrite adapter arms on the TV adapter plate using 8x bolts (AA). (Fig.2A)

2. Test the TV mounting bolts (A-P) and nd the diameter that ts the VESA mounting holes. (Fig.2B)

3. Attempt to fasten the plate using the shortest possible screws. Use washers and spacers (Q-W) as needed to fasten the

plate parallel to the back of the TV.

Figure 2A Figure 2B

Bolts (A-P)

Back of TV

SunBrite

Adapter Bars x4

Bolts (AA)

Large Displays (Up to VESA 600x400)

1. Assemble the adapter brackets and bars on the TV adapter plate using 8x bolts (AA). (Fig.3A)

2. Test the TV mounting bolts (A-P) and nd the diameter that ts the VESA mounting holes. (Fig.3B)

3. Place 4x square washers (U) into the slots where the VESA mounting screws will pass though. (Fig.3C)

4. Attempt to fasten the bracket to the TV using the shortest possible screws. Use washers and spacers (Q-W) as needed

to fasten the plate parallel to the back of the TV.

Bolts (AA)

Adapter Bars

Adapter

Brackets

Back of TV

(U)

M4 or M5

M6 or M8

(A-P)

Figure 3A Figure 3B Figure 3C