Installation Manual

2
WARNING
• We highly recommend this product be installed by a qualied professional.
• Please do not begin installation until you have thoroughly read and understood these instructions.
• This mount supports display mounting from VESA 75x75, 100x100, 200x100 and 200x200
• This mount supports a maximum load of 80 lbs (36.4 kg).
• Ensure the ceiling will safely support the combined weight of the mount and your chosen display.
• The manufacturer does not accept responsibility for incorrect installation.
CAUTION:
These ceiling mounts are intended for use only with the maximum weight of 80 lbs (36.4kg).
SPECIFICATIONS BOX CONTENTS TOOLS REQUIRED
• Power Drill
• 3/16” (5mm) Drill Bit
• 5/16” (8mm) Masonry Bit
• 1/2" (13mm) Wrench
• Ceiling Plate Assembly (1)
• Mounting Head (1)
• Adapter Plate (1/2)
• 18" Fixed Extension Pole (1)
• Hardware Kit (1)
• Phillips Head Screw Driver
• 3/8” Socket Wrench
• Maximum Load: 80 lbs (36.4 kg)
• Ex
tension: 18 inches
• Stainless Steel Mounting Hardware
• Pan/Swivel Range: 360°
• Tilt Range: +0° /-20°
• Weather Resistant Coating
• VESA patterns: 75x75, 100x100,
200x100 and 200x200
• 7/16” Socket Wrench
HARDWARE KIT CONTENTS
M4 x 12mm Philips
Head Screw (x4/8)
M6 x 12mm Philips
Head Screw (x4/8)
M8 x 16mm Philips
Head Screw (x4/8)
Allen Wrench, 2.5mm,
Security (x1)
Allen Wrench, 4mm (x1)
Security Wrench (x1)
M4 x 20mm Philips
Head Screw (x4/8)
M5 x 30mm Philips
Head Screw (x4/8)
M6 x 30mm Phillips
Head Screw (x4/8)
M5 x 12mm Philips
Head Screw (x4/8)
M6 x 20mm Philips
Head Screw (x4/8)
M5 (16 x 5.3 x 1.5mm)
Metal Washer (x4/8)
M6 (17.8 x 6.5 x 1.5mm)
Metal Washer (x4/8)
M8 (20.5 x 8.5 x 2mm)
Metal Washer (x10/14)
#14 x 2.5” Lag Screw (x6)
M4/M5/M6 Spacer:
12mm (x4/8)
M5 x 4mm Set Screw (x6)
M8 x 20mm Philips
Head Screw (x4/8)
M
10 Nylock Nut (x1)
M10 x 65mm Bolt
(x1)