Installation Guide

8
Technical Support
For chat and telephone, visit https://tech.control4.com/s/contactsupport • Email: [e-mail]
Visit tech.control4.com/technician for discussions, instructional videos, news, and more.
Warranty and Legal Notices
Find details of the product’s Limited Warranty and other resources such as regulatory notices and patent and safety
information, at snapone.com/legal or request a paper copy from Customer Service at 866.424.4489.
Copyright ©2022, Snap One, LLC. All rights reserved. Snap One and its respective logos are registered trademarks or
trademarks of Snap One, LLC (formerly known as Wirepath Home Systems, LLC), in the United States and/or other countries.
Control4 and SunBriteTV are also registered trademarks or trademarks of Snap One, LLC. Other names and brands may be
claimed as the property of their respective owners. Snap One makes no claim that the information contained herein covers all
installation scenarios and contingencies, or product use risks. Information within this specification subject to change without
notice.
220307-1600
Part # 200-SB-WM-ART2-A
Adjustments
Tilt Adjustment
Loosen the tilt levers on the head of the arm assembly enough to allow controlled adjustment. Set the
desired tilt, then re-tighten the locking levers. (Fig.11)
Once the tilt levers are locked, their position can be adjusted by pulling out on each lever and rotating
it to a less obtrusive position.
Horizontal Adjustment
Slightly loosen the two screws on the head of the arm assembly using the provided Hex key (Fig.11).
Then, firmly hold the display by two opposite corners and gently turn it into the desired position
(Fig.12). When level, re-tighten the screws.
Cable
Covers
Horizontal
Level
Adjustment
Screws
-15°
6°
Tilt Lever
(1 on each side)
+/- 5°