Installation Guide

6
Assemble TV Bracket
Lay the TV flat on a soft, flat, surface and locate the four VESA mounting bracket holes. Determine the
VESA pattern and prepare the TV bracket and adapters accordingly.
Medium Displays (Up to VESA 400×400)
Assemble the four SunBrite adapter arms on
the TV adapter plate using 8 bolts (AA).
Test the TV mounting bolts (A–P) and find the
diameter that fits the VESA mounting holes.
Fasten the plate using the shortest screws
possible. Use washers and spacers (Q–W) as
needed to fasten the plate securely, so that it
remains parallel to the back of the TV.
Large Displays (Up to VESA 600×400)
Assemble the adapter brackets and bars on the TV adapter plate using 8 bolts (AA).
Test the TV mounting bolts (A–P) and find the diameter that fits the VESA mounting holes.
Place 4 square washers (U) each into the slots where the VESA mounting screws will be installed.
Fasten the plate using the shortest screws possible, and using the proper hole as indicated in the
illustration below. Use washers and spacers (Q–W) as needed to fasten the plate securely, so that it
remains parallel to the back of the TV.
Bolts (A–M)
Back of TV
SunBrite
Adapter Bars ×4
Bolts (X)
Bolts (X)
Bolts (X)
Adapter Bars
Adapter
Brackets
Back of TV
Square Washers (R)
M4 or M5
M6 or M8
(A – M)