Retro Kettle Variable Temperature Kettle This book covers the use and care of the following kettles: KE5200C, KE5200W, KE5200H, KE5200B Please read these instructions carefully and retain for future reference.
Contents Sunbeam’s Safety Precautions Features of your Retro Kettle Using your Retro Kettle Before First Use Adjusting Temperature Controls Tea Brewing Styles and Tips Sunbeam’s 3-Way Safety System Care and Cleaning 1 2 4 6 7 8 Important instructions – retain for future use.
Sunbeam’s Safety Precautions • • • • • • • • • • • • • • • • • SAFETY PRECAUTIONS FOR YOUR SUNBEAM VARIABLE TEMPERATURE KETTLE. Boiling water will scald. Do not leave a boiling or hot kettle near or where children may touch it. Do not leave the power cord near the edge of a bench top where children may touch or pull it. Do not move kettle while switched on. Always turn the power off and unplug the cord while the kettle is NOT in use. Do not operate the kettle without water.
Features of your Retro Kettle Removable lid With large opening for quick and easy filling. Large spout Enables quick and easy filling at the tap, without the need for removal of the lid. Easy read water gauge The full length water gauge indicates the volume of water in the kettle, up to 1.5 litres. 2400 watt concealed element The fast boil 2400 watt element is concealed in the base of the kettle for longer element life. The smooth stainless floor reduces scale build up and allows for easy cleaning.
3-Way Safety System. 1 – Automatically switches the kettle off after boiling. 2 – Cuts out for boil-dry protection. 3 – Shuts down in case of overheating. Keep warm feature Conveniently maintains the selected water temperature for up to 20 minutes. Variable Temperature Controls An easy to use control panel that allows you to select from 4 brewing temperatures: 80°C, 85°C, 90°C and 100°C (boil). 360 degree cordless power base. Designed to allow you to place the kettle on the base in any direction.
Using your Variable Temperature Kettle Before using your kettle. It is recommended that you clean your kettle before using it by filling the kettle with water to the maximum level indicator, boiling the water and discarding. Using your Variable Temperature Kettle Important: Do not fill the kettle over the maximum level, as water may spill out of the spout when boiling. 1. To fill the kettle, remove it from the power base and lift the lid by pulling the lid release on top of the kettle upwards.
Using your Variable Temperature Kettle continued Note: If the kettle is removed from the power base during the keep warm function, the kettle will automatically reset, cancelling the keep warm function. 7. Press the power button to start the water heating to your selected temperature. The kettle will beep once when the selected water temperature has been reached. Note: To cancel the heating process at any time during the boiling cycle, simply press the power button once. Quick-Start Boil Instructions 1.
Tea Brewing Styles and Tips Optimum Tea Temperatures The Variable Temperature Kettle has four optimum tea brewing temperatures 80°C, 85°C, 90°C and 100°C (boil).
Sunbeam’s 3-Way Safety System Safety is a major consideration in the design of a Sunbeam kettle. This is why we have developed our 3-Way Safety System, which ensures that your kettle will: 1. Automatically switch off after boiling. For convenience, safety and energy efficiency, your Sunbeam kettle will automatically switch off after boiling. 3. Shut-down in case of overheating. In the event of overheating, the kettle will automatically shut down to prevent further damage.
Care and Cleaning Always remove the plug from the power outlet before cleaning. Never immerse the kettle switch area, kettle jug base, cord or powerbase in water, or allow moisture to come into contact with these parts. Cleaning the stainless steel heating plate This kettle features a non-corrosive stainless steel heating plate. Over time, scale may build up on the heating plate inside the kettle, causing discolouration that may have the appearance of rust. Be assured this is not rust.
12 Month Replacement Guarantee In the unlikely event that this appliance develops any malfunction within 12 months of purchase (3 months commercial use) due to faulty materials or manufacture, we will replace it for you free of charge. Should you experience any difficulties with your appliance, please phone our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. Alternatively, you can send a written claim to Sunbeam at the address listed below.
Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 is a registered trademark. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. © Copyright. Sunbeam Corporation Limited 2011.
